hay while sun shines
Making Do It Yourself solar power panels is a delicate process, and it is for this reason that major solar advances did not come into play until the lattermost quarter of the last century, when advances in semiconductors and photovoltaic design allowed increasingly efficient and affordable solar cells to be developed.
In order to work on the Do It Yourself Solar it is important to understand how solar power panels are made, how to install solar panels, and how to keep current with the latest photovoltaic designs are more helpful.
To make a Solar Panel we need to follow the following simple six steps:
Take a copper sheet that measures a square foot. Use electric shears to cut to the size required. These copper sheets have to be washed with the help of sand paper in order to remove any corrosive compounds. Once cleaned, you can place the shiny sheet on the stove. Heat it until you obtain a black cupric oxide layer over it. Allow it to cool naturally. If you try to cool it immediately there are chances that the black cupric oxide layer doesn’t wash off. Once the black layer flakes off, cuprous oxide remains. Now it is soldered with an insulated wire to create negative and positive terminals. It is now placed in a solution like saltwater and connected to the ammeter. Now your solar cell is ready for use and generate non-stop green solar energy for your home and saves your money.
Home Made Energy - Learn about wind and solar energy www.renewableenergy4earth.com
