Solar Energy Center

By: Osita Modozie
Due to the raising scarcity of fossil fuels, majority of persons are searching for other sources of energy. The biggest source of energy man can’t do without is the sun. it is achievable for you to build your own solar panels, also known as photo voltaic cells, the type which a typical individual; is able to produce. It isn’t as advanced as the ones created from silicon. But the good part is that it has same capability and will enable you to love off the grid. Below are the steps you should consider if you hope to make your solar panel. Meanwhile you can get an ebook or a video guide on building your own solar panel at Earth 4 Energy.

Materials you require are Two 1/2 square foot sheets of copper flashing, two alligator clip leads, micro-ammeter, hot plate, large plastic bottle, kitchen salt, pure water, sand paper, pincers, sponge, and towel.

Get a copper sheet. Make use of a sandpaper to scrub smooth all the sections of the copper sheets. There should be no deterioration on the copper for this process. Clean the copper sheet using water, soap and a sponge. Don’t let any oily substance from your hands rub the copper.

Dry the copper with a piece of cloth, handle it in such a way that you wont get in contact with it. Make use of a pincer to put the copper on the hot plate. You are putting it on the hot plate to make it hot

Heat the copper to red heats for 30 minutes. See that a thick black layer of oxides will appear on the surface of the copper. Don’t leave the copper unassisted as it is heating.

Both the oxide layer and the copper under will cool at various rates, making both of them to divide. It can be wild and evaporate hot cupric oxide. Take care not to come ear or bring stuffs that are inflammable there. It will require just 20 minutes to chill down to normal temperature.

Rinse the copper cautiously in pure water. This is done to remove majority its black particles. After washing, you should only see the red layer of cuprous oxide created under the layer of the cupric oxide.

Grab the heat copper sheet and the unheated sheet, fix both into the plastic container, and curve each of them out in order for the 2 sheets not to contact.

Hold together one of the alligator heads to the top of both of the sheets and link them to the meter. Let the positive unit of the meter link to the unheated sheet while the negative unit connects to the heated sheet.

Melt some salt using 2 teaspoons inside 2 cups of water. Transfer it inside the plastic container so that the water height reaches an inch of the sheet’s tops.

Put the bottle outside on the sun and observe the meter. It’s supposed to increase gradually to up to 50 micro-amps. Bring the container to a shade and the meter will reduce below ten.

This is a beginner’s guide to building a solar panel; if you still the ideas to build a solar panels which you can use to power your home. Earth4Energy provides you with all the guides you need to accomplish this.

Earth 4 Energy is a manual that contains both ebooks and video instructions you can use to easily build your own solar panel for under $250. If you want to live off the grid, this is your best alternative source to start generating your own electricity from today.

See more about it at http://modospot.com/review/earth4energy.html